(一)涂装设备操作人员必须熟练掌握各种机械的构造、性能和操作、维护方法、做到专人使用、专人负责. (a) painting equipment operators must be familiar with the construction, performance and operation of mechanical, maintenance methods, so that people use, person in charge. (二)操作木工机械时,应穿戴好工作服,扎紧袖口,女同志必须戴好工作帽,辫子放入帽内;不许戴手套、围巾等进行操作. (two) the operation of woodworking machinery, should wear working clothes, tie cuffs, women must wear a hat, braided into the cap; not wearing gloves, scarves and other operations. (三)机械开始工作前必须先试车,各部件运转正常后方能开始工作. (three) the machine must be run before the start of the work, and all the parts are in normal operation. (四)设备上的轴、链条、皮带轮、皮带及其他运转部分,都应设置防护罩和防护板. (four) the shaft, chain, belt pulley, belt and other running parts of the equipment shall be provided with a protective cover and a protective plate. (五)机械运转中如有不正常情况或发生其他故障时,应立即切断电源,停机检修. (five) if there is any abnormal situation or other faults in the mechanical operation, the power supply should be cut off immediately, and the maintenance of the machine is stopped. (六)设备周边多为易燃品,应严禁烟火. (six) the peripheral equipment is more flammable, should be strictly prohibited fireworks. (七)调试维护涂装设备时,必须切断总电源. (seven) when the coating equipment is debugged and maintained, the total power supply must be cut off.